How to use Machine Cup Sealer / Press Cup Drinks Machine

Cup Sealer Machine / Machine Press Cup Drinks
What is a machine cup sealer? Cup sealer machine is a machine that is used to cover the surface of the cup drinks that give the impression neat, beautiful and not spill (make it easy for shoppers to bring drinks), cup sealer machine uses the principle of heating (heating) and cutting (automatic cuts), the type of cup can use a sealer cup sealer machine is a cup that has a rounded surface (kind of cup on the press box can not use this machine). In general, the market supply type manual cup sealer machine, semi-auto and automatic, which sets it apart is the way the overall operation of the machine. Currently, we only offer one type of machine which is a type manual cup sealer, the question is why? Since our goal is a unit of the new business unit to grow and evolve in terms of sales of drinks, so that the capital can be minimized expected to reduce capital cost and generate a hefty profit. One of the capital that is considered important is the availability of this cup sealer machine, if the price of the engine alone is expensive then surely Return of Investmentnya also takes longer. Well for that, we try to help provide cup sealer machine at an affordable price. Following detailed manual cup sealer machine products
How to Use Machines:

1. Once all the components are mounted cup sealer machine, includes: 2 pieces of plastic rod rollers roll (top seal), handles the press, top seals are installed and electrical connecting cables also been installed, then the next

2. Connect the power jack (AC) to the power outlet, press the button and turn ON / setting the temperature to 250 degrees (the indicator will light red that reads "HEAT" is the process of heating element heater. Generally used seal top plastic manifold types of PP , for that after heating heater (estimated 5 minutes or after the indicator light switch back to green light) then turn the thermostat back to number 150 degrees.

3. Drag cup drinks (position is below), prepare and drink the cup will put in a press and then pull up the press machine (position on the right side) to the bottom to get stuck and hold for 3-5 seconds and then the handle is returned to its original position. After that, pull the cup where drinks and you'll get a drink / product you've packed in anti-spill cup packaging, more neat and attractive appeal suggests that buyers will be more eager to buy your drinks.
(More info can be found on the packaging instructions manual press machine cup drink)

Source of article : http://ideebisnis.blogspot.com/2012/09/cara-menggunakan-mesin-cup-sealer-mesin.html

Readmore → How to use Machine Cup Sealer / Press Cup Drinks Machine

HOW TO USE SOLDER STEAM

Solder Steam useful to remove, install, print and re-solder components, both SMD (centipedes), BGA (ball-ball lead) and other small components. The process of re-soldering or heat the IC is to improve the ic legs that may be less attached to the PCB and not to repair a damaged IC. Temperature and air pressure on the solder fumes must be considered in order not to damage the PCB, solder fumes in the use of required accuracy, precision and accuracy patience. How to hold the solder fumes must be strong and perpendicular to the target component soldering.

HOW TO USE HOT AIR BLOWER
Blower is one variant of the solder. Called Hot Air blower for use with air process. In standard blower used in the lab, there are 2 settings. The first setting is the power of heat (heating) to be issued through the eyes of solder, and other settings is pressure (force blast) of air will be emitted. Both linear regulator is working with each other. The higher the temperature of the air being emitted, will get stronger again if air pressure is raised to be issued.

HOW TO USE HOT AIR BLOWER

Use of blower is quite simple. In the application process of soldering the components, how to hold the blower exactly the same way as holding a normal solder. The main advantage of this blower is melt lead with air expelled, not with an iron rod used in the ordinary solder. As for how to use this blower is:

Attach the cable to PLN Electricity Power Button Press the ON position, to run a blower function.
After Blower On, we can set the settings contained in the blower.
The first setting is Heating (heat / temperature), while the second is an air pressure regulation to be issued.
Turn the heat setting to the desired temperature, such as 200 degrees C. Temperature of 200 º C will be generated, but will not be felt on the soldering tip removed if air pressure is positioned on 0.
For Digital Blower, Set the temperature by pressing the UP and DOWN. The air pressure is set by way of playing.
Adjust the air pressure as desired, such as on positions 1, 2, 3 or others.
The air will be exhaled 200 degrees C and can be felt heat released. In circumstances as above, the blower can be used for the desired purpose.
Use of blower is dependent upon the type of device to be soldered, because it will be highly correlated with the settings of the heat and pressure of the air blower.


HOT AIR BLOWER SETUP / SOLDER UAP

Removing fluid (dry) 100-200 degrees, the air pressure 8 (toned)
Heats / melt lead from a position above 350-400 degrees, the air pressure 3 (select the most slowly)
Heats / melt lead off the bottom of 350-400 degrees, the air pressure 3 (select the most slowly)
Lifting and installing the components 350-400 degrees, the air pressure 3 (select the most slowly) Lifting of Flexible PCB 250-300 degrees, the air pressure 3 (select the most slowly)
Lifting the plastic components 250-275 degrees, the air pressure 3 (select the most slowly)
Printing the IC 350-400 degrees, the air pressure 3 (select the most slowly)

HOW TO USE THE BLOWER TO OPEN IC SMD

IC IC SMD is that he does not go in the hole PCB, but stick directly on the PCB board. As in previous guidance, we can use a blower fatherly open the IC that can not be opened with ordinary solder. IC-IC is widely available on computers, mobile phones and other technological devices.
Setting blower suit the needs of the components to be opened.
Prepare a pair of tweezers to hold / pull the component that will be open.
Oleskanlah anti hot liquids (FLUX who Condensed) on the circuit or component to be on the blower, like the surface of the IC to be opened.
Use a blower to melt lead-tin attached to the foot of ICs and circuit boards. Navigate eyes blower to the legs.
Spray air blower Tin hinga completely melted, do not pull the component with tweezers too strong, because it will cause damage to the lead track on the circuit board.
Once completely melted tin, body rocking IC with tweezers, then remove with tweezers / Vacuum Pen.
IC opening process has also been completed.

Readmore → HOW TO USE SOLDER STEAM